Видео

the fact that no one addresses the issue with the inside "bumps" kinda pisses me off. I got the 150 version which has tehe same issue

Hi Rob, I confirm the 1/3 stop power loss, I have tested 2 unites (heads) with Sekonic LITEMASTER PRO in different scenarios, cable fully extended, cable laying on ground cable not touching the stand, you name it, it is always 1/3 stop less, I have done at 1/4 power, 1/2 and Full power, and at distances ranging between 1.5 and 2 meters for both heads, with different reflectors, the flash standard reflector and the bownes standard reflector, always consistently losing 1/3 stop of power, making the AD600Pro with the head more like AD400Pro, I know I got less weight slightly better recycle time and the power when needed, but the loss of power and shorter cable sounds like a downgrade to me compared to the previous model.

Love it

I have a sony A7c for photography with the transmitter. I want to use a Sony A7i for photos and use the A7c for videos Can the transmitter work with the a7i??

2024... the problem is still there

How do you get 5977-6377K range from a 5600K +/-200K light? Did something go wrong?

Love the zoom idea! ✨👌🏾

I recently purchase a new X pro II N trigger. Everything is working fine in iTTL mode. My issue is when I switched to manual mode the unit isn't controlling my flash output. I'm using a Nikon Z9 with a Nikon speedlight SB-910. Im also using a X1R-N receiver along with my S Pro II -N. Thanks in advance for any response to my question.

Thank you

Have you tried DxO Photolab?

super well done - thank you!

Very helpful, thanks!

Hello Rob, have you ever run into any issues with this flash with the SONY A7III ...for some reason i am getting a message that says this accessory is not compatible. but the flash works as well at times.

Where's hss??

Have you been able to get the Xpro or Xpro II to work in TTL mode? I have owned both triggers for Sony, and neither work in TTL mode. All images are underexposed by 1-2 stops...but inconsistently. This is a well documented problem that's still unresolved. Godox did not repond to my past requests for help. Disappointing.

I gave up on this and put it on my AD200 instead and it works very well. For my AD300 I got a NEEWER Cold Shoe Flash Bracket Mount with Pistol Handle Grip and no adapters are required. I also took out the two screws to flip the top 90 degrees so it goes on with no issues.

Which one produces the most uniform light?

can you use the same battery type across the V1 and V1 pro ?

Can you make an updated if your still using C1 or if you went back to Lr

I know this is super old but I'm still trying to work out if the QT strobes have any colour and/or power consistency advantages over the AD strobes, or even over the cheaper studio strobes, or does the colour stable setting basically just turn it into an AD600

New user to capture one. I am missing something in general here. I just shot a job with my Nikon set to raw/jpg (had to remove the Nikon SD card for C1 it to work) into Capture One. I assumed that Capture One would use the Nikon setting of RAW and JPG on the Capture One when it captured the images. Where do you tell C1 to save the files as RAW files....thanks

Awesome tutorial!!

Light stand at 4:29, is it came with original package?

HSS works. I would not place anything near my sensor. And damage it!

Thank you. It would be great to talk about indoor studio, art portrait... I suppose the ad400 is the best, but perhaps also the ad300 with the bowen adapter ?

Thank you. For me an issue is to use softbox and having light modeling. Does one Ad200pro enough powerful for a big softbox ? If not the ad400 seems great out of the box.

Update v1.13 brings back connecting the X3s to the Sekonic L-858. Updates on a Mac (M3 Max used) need to go through Godox G3 and a intermediate hub, but after connection simple and seamless. Use the unit for studio and mobile use. Battery is no factor. Even if battery was an issue, plugging in a power source - continues to operate/fire while on charging/outside power! (Yes, I've run it that way...continuing to check lighting on the Sekonic and shooting!)

I want to see how this light will work in outdoor conditions, like how much temperature it can withstand.

Can you adjust the power of 1 unit with the tactile scroll wheel on the right?

Optical cell triggering on the P2400 via a Sony Speedlight?

Rob, I agree with your redesign of the UI. I am an architectural and portrait photographer with a studio. I am experimenting with the Xnano as a remote control of my strobe output when shooting twilight shots. I leave the R2 Pro 2 on the camera and fire it with my Camranger 2. I also use the Godox Flash app on my Android phone to adjust my strobe lights, especially in my studio.

Many thanks. GOD bless you.

Many thanks for a great tutorial. Had to slow it down by 2 stops though. GOD bless you.

Whats the clamp you fixed it on the stand please?

is there any remote control?

do you prefer using soft box or beauty dish when shooting out doors

I do like my x3 but have noticed an issue in using it. I am a high school senior photog and I am on location shooter and noticed that HSS just magically turns off on my unit. Have you ever noticed this? do you know why this happens?

Really curious about these, as thoughts are they are geared towards fixing face issues, so more portraits, how would you say it fairs against editing other skin areas? I have started shooting a lot of swimwear, so by nature a lot more skin to edit with smoothing and blemishes etc, do the plug ins work across these areas or do you still have to do this more manually?

Hi Rob, I have been using Capture One for the past few years, and I think it is a uniquely beautiful program. Unfortunately, I always switch back to LR because I can edit faster with it, for example square photos. In LR I can sort 1 photo, square it and then quickly edit the other photos as well. Can I also do that quickly in Capture One? We are a school photographer and want to have the files at the photo lab as quickly as possible after processing. But I really want to work with Capture one and have also purchased the latest version. There are so many more possibilities with Capture one. But I don't work with it enough to learn more about the program. Gr. Herman - from Holland

Might be the perfect hair / separation light for photos. Kinda steep price to test it :D.

The God of Godox channel!

The only video that actually explains this flash

After 2 months of using this trigger, I hate it. LOL By this point in time, I would hope to have the hang of it - I don’t. I’ve used it probably 20-30 separate times on shoots and I simply don’t like it. I’m back to using my older triggers.

Your demonstration is so helpful. Everything I've heard is the shutter controls the background and the aperture controls the flash. But according to your video, the three key three elements (shutter, ISO, and aperture) all work in tandem with the overall exposure.

Just got this with the r5 and 85mm f2 + 35mm. So excited to use it !

Thanks for your video. My main concern is I have a vertical grip attached to the bottom of my camera. Will it fit the R200? Or do I have to remove it? Thanks!

I would love to see a comparison with the g300 in max mode vs the b500 (especially with respect to noise and size.) Thanks!

Молодец. Хорошее видео получилось

Black lives Matter -photographer

ThankYou Very Much !!!!!!!!!!!!!!!!!!!!!!!!!!!!! :) :) :)